Day 11

Today I started working on the  divider as well as the overflow gutters for the main sand vessel. First the gutters got sealed with silicone to the tank and, held by clamps to let dry. Later I began constructing the middle divider out of sheet metal. The metal we got at the store is to large to use with the saw, so I used an electric cut off saw to cut the metal. Right before lunch we got to silicone the middle divider on as well as work on the other two dividers that will be used for extra support. We also found out that the tank was not quite put together properly, so now I am working on making another sand divider to better fit our tank. I am making this in solid works and should be able to 3D print it tomorrow.