By blues, we mean matlab blues. Ethan decided to learn the "language" and I would say he's getting the hang of it.
 |
| Proud Coders |
Sofar,
We tried to fix the discrepancies between the sensor (to no avail yet), adding the delay time in the reading did not improve the data. Right now we are emailing Northern Widget and see if they can help us on fixing it.
 |
| as can be seen, the difference in sensor A and B in three-run cannot be determined yet. |
We hooked up a lamp (which is going to be replaced by the pump to test if it will work. The theory is when the sensor recognizes the difference in water pressure it will turn the pump on and off.
 |
| lamp is hooked up! |
Andrew fixed some bugs that were in the code, and he got the sine wave working to simulate water cycles. In the meantime, we are trying to figure out why the lamp hooked to Adruino keeps flickering on and off during each loop.
We derived the conversion factor between PSI and cm of water for the given 4 degrees C, tomorrow we will see if we get significant differences using the temperature in the room.
ReplyDelete